6" Dual MagMover

$45.00

Description

MagMovers are used to lift ClikMagnets (+ item to be hung) to metal on the ceiling AND to safely retrieve them when it is time to change your display. All while standing on the floor!!

MagMovers have the standard acme thread for attachment to the MagPole or most other threaded poles.

 

Specs:

  • The 6″ Dual MagMover has two ‘posts’ (spaced 6″ apart) and is used to hold up to two It is ideal for items that have up to two attachment points.
  • 5″ x 7″ (8.5 cm x 18 cm)
  • 1 / per bag
  • Item Code: 10402

 

Suggestions:

  • For use with the Flush Mount Clips, the spacing between attachment points must be 6” – the same width as the 6” Dual MagMover.
  • For use with the FlatHats, the spacing between the attachments points must be the same 6” – the same width as the 6” Dual MagMover.
  • For attachment points spaced 8” to 12” apart, the length of line between the ClikMagnet and your item to be hung (the distance between the top of your item and the ceiling) should be 6 inches or longer.
  • For attachment points spaced 13” to 24” apart, the length of line between the ClikMagnet and your item to be hung (the distance between the top of your item and the ceiling) should be 12 inches or longer.
  • Take down: Each post has a corkscrew. When it is time to remove your items, rotate out the corkscrews and insert fully into the ring of the ClikMagnet and ‘pull’. The curls of the corkscrew holds the item from falling to safely bring it down.
  • Usually used for the installation of signs or balloon displays.

Compare products


You have no product to compare.

Wishlist Products


You have no product to wishlist.